
GALVANOX
Single-component epoxy paint with a high zinc content. After the solvent evaporates it leaves a grey dry film. GALVANOX prevents rust and its spread on metal, iron and weld beads. It adheres to steel and iron by electrochemical fusion. The metallic zinc forms a protective anode, with the coated surface as the cathode. The potential difference between the zinc layer and the iron to be protected promotes full passivation against corrosion. Coverage: 8-10 m2 per litre for a 70-micron coat (2 coats).
Application
Ideal for metal structures, weld beads, transmission towers, re-galvanising, metalwork products such as gates (resists dog urine), doors and railings, the food industry and marine use (offshore platforms and boats). Suitable for cold-storage plants, as it resists the corrosive action of blood and temperature variations.
How to use
Mix well before use. Apply GALVANOX onto clean, dry metal. Remove greases and oils with solvent. Remove all old paint and let it dry completely. If the surface has light rust, remove it with NEUTROX or a wire brush; if the rust is heavy, it must be removed by sandblasting. The applied coat thickness may vary between 30 and 50 microns. At this thickness GALVANOX offers protection comparable to hot-dip galvanising. A thickness of 60 to 70 microns is recommended for superior resistance. Apply with a brush, spray gun and/or by immersion. For spray-gun application or a thinner coat, GALVANOX must be diluted with BIOSOLV TX or a good-quality thinner.
Packaging
220 ml, 900 ml and 3.6 litres.
Technical Specifications
| Attribute | Value |
|---|---|
| Appearance | Matte gray liquid |
| Density | 1,7 g/cm³ |
| VOC (Volatile Organic Compound),% | 30 |
| Drying | 1 hour for handling; 24 hours before applying another coat |
| Salt spray | > 1200 hours |
| Solids content, MT 013, % | 70 |
Precautions
Flammable product. Use PPE. May be fatal if swallowed. Do not induce vomiting; seek a doctor. Avoid prolonged contact with the skin. In case of eye contact, rinse with plenty of water for at least 15 minutes. Keep out of the reach of children and animals. For further safety information, request the product's SDS. Store away from sunlight, in a dry, airy place, away from sources of heat and ignition. Occasionally turn the cans upside down. Never puncture or reuse the packaging.
Shelf life
Stored in a cool, dry place - 12 months.
Need technical guidance?
Our team of specialists can recommend the ideal formulation for your industrial process. Talk to us and get personalized support.
