Our Solutions
Industrial fluids, lubricants and technical solutions from Biolub. Filter by category or search by name to find the right product for your process.
65 products found
Cutting FluidsAQUALUB
Water-based synthetic fluid, solvent-free, environmentally sound. Suitable for cutting metals in general, such as: carbon steel, stainless steel, yellow metals, aluminium and its alloys. Acting as a cooling lubricant, using it from the start of the operation extends tool life and prevents breakage. It eases free cutting action, increasing output. Suitable for machining harder metals, providing an excellent finish.
View product
Synthetic Soluble OilsBIO 100 E
Synthetic soluble oil for machining. In aqueous solution it remains transparent greenish. It has exceptional durability and excellent lubricating, cooling and anti-corrosive power. It does not stain yellow metals, aluminium or stainless steel. It does not cause dermatitis when used properly. Biodegradable product, making it easier to handle and reducing the risks of use and disposal.
View product
Biodegradable Lubricating OilBIOFLUID HEES
BIODEGRADABLE lubricating fluid for hydraulics, slideways and gears/reducers, based on synthetic ester with extreme-pressure/anti-wear, anti-corrosion and antioxidant additives. ANP 18105.
View product
Maintenance AidsCERÂMICO PINTÁVEL
Two-component epoxy coating in light blue with high resistance to abrasion, corrosion and chemical agents. Reinforced with ceramic minerals. It provides excellent adhesion on all metals, including stainless steel, resulting in a vitrified, waterproofed surface with an excellent finish. It resists chemicals, petroleum solvents, seawater, alcohols, petrol, diesel oil, alkaline products and dilute acids. It withstands temperatures from -10 to 130ºC, with peaks of 170ºC. High solids content. Coverage: 1.2 to 1.6 kg per m2 for coats 1 mm thick.
View product
Maintenance AidsFITA ISOLANTE LÍQUIDA
Viscous product with high dielectric strength; it replaces insulating tape. Available in red, yellow, black, clear and white.
View product
Maintenance AidsGALVANOX
Single-component epoxy paint with a high zinc content. After the solvent evaporates it leaves a grey dry film. GALVANOX prevents rust and its spread on metal, iron and weld beads. It adheres to steel and iron by electrochemical fusion. The metallic zinc forms a protective anode, with the coated surface as the cathode. The potential difference between the zinc layer and the iron to be protected promotes full passivation against corrosion. Coverage: 8-10 m2 per litre for a 70-micron coat (2 coats).
View product
Semi-Synthetic Soluble OilsLUBCOOL MS 80
Conventional soluble cutting oil with high lubricity and protection. It must be added directly to the water, avoiding the formation of an inverted emulsion.
View product
Semi-Synthetic Soluble OilsLUBCOOL SS 110
Semi-synthetic soluble cutting oil with high cooling power and protection. Biostable product. It offers high resistance to emulsion deterioration and consequently an extended service life.
View product
Semi-Synthetic Soluble OilsLUBCOOL SS 120
Semi-synthetic soluble cutting oil with high cooling power and protection. Biostable product. It offers high resistance to emulsion deterioration and consequently an extended service life.
View product
Semi-Synthetic Soluble OilsLUBCOOL SS 150
Semi-synthetic soluble cutting oil with high cooling power and protection. Biostable product. It offers high resistance to emulsion deterioration and consequently an extended service life.
View product
Semi-Synthetic Soluble OilsLUBCOOL SS 550
Semi-synthetic soluble cutting oil with high cooling power and protection. Biostable product. It offers high resistance to emulsion deterioration and consequently an extended service life.
View product
Cutting and Stamping OilsLUBCUT 205, 210, 222, 232 e 246
Mineral-based product with a lubricity agent, antioxidant and extreme pressure. Because of the inactive sulphur, it is recommended for ferrous and non-ferrous metals. The LUBCUT 200 SERIES is classified as a triple-purpose oil, that is, it can be used as a cutting, lubricating and hydraulic oil.
View product
Cutting and Stamping OilsLUBCUT 310, 322, 332 e 346
Based on mineral oils, with lubricity, antioxidant and extreme-pressure additives. Because of the active sulphur, it is not recommended for copper and its alloys.
View product
Cutting and Stamping OilsLUBCUT 415
Straight oil based on mineral oils, with a lubricity agent, antioxidant and extreme pressure.
View product
Cutting and Stamping OilsLUBCUT 5,10 e 22
Straight machining oil for ferrous and non-ferrous metals, formulated with selected base stocks and specially selected additives that extend tool life through extreme pressure and lubricity, and which also contains anti-rust, antioxidant and anti-mist additives.
View product
Cutting and Stamping OilsLUBCUT ER 2
Dielectric fluid for sinker EDM processes.
View product
Cutting and Stamping OilsLUBSTAMP 100 e 220
Stamping oil based on mineral oils with lubricity, antioxidant and extreme-pressure additives.
View product
Cutting and Stamping OilsLUBSTAMP CF 68
Bolt-stamping oil based on mineral oils with lubricity, antioxidant and extreme-pressure additives.
View product
Cutting and Stamping OilsLUBSTAMP EV 604, 608 e 615
Low-viscosity, volatile oil with a highly lubricating residue, additised to extend tool life.
View product
Cutting FluidsMACHÃO 14000
Synthetic fluid with high cooling power. Using it from the start of the operation extends tool life and prevents breakage. It eases free cutting action, increasing output. It contains synthetic esters that ensure molecular attraction and high lubricity. Free of volatile solvents.
View product
Cutting FluidsMACHÃO AL
Synthetic fluid with high cooling and lubricating power. It performs cutting operations on aluminium without clogging or seizing. Using it from the start of the operation extends tool life and prevents breakage. It eases free cutting action, increasing output. It prevents burrs and scoring on machined parts.
View product
Cutting FluidsMACHÃO TOTAL
Synthetic fluid with high cooling and lubricating power. Immediate action on seized tools, it speeds up the machining operation. Using it from the start of the operation extends tool life and prevents breakage. It eases free cutting action, increasing output.
View product
Maintenance AidsNEUTROX
Neutrox acts chemically on rust, turning it into passivating phosphates, improving the adhesion of anti-corrosion protectives and the protection of the paint applied over it. For ferrous and rusted surfaces, especially those where the rust cannot be completely removed either manually or by an abrasive process.
View product
Maintenance AidsPROTEX FILME
It forms a flexible film that protects against rain, sea air, salt water, acids and alkalis. It protects against oxidation, rust and mould. It does not peel, and is anti-slip, washable and durable. Available in red, yellow, black, white and clear.
View product
