
NEUTROX
Neutrox acts chemically on rust, turning it into passivating phosphates, improving the adhesion of anti-corrosion protectives and the protection of the paint applied over it. For ferrous and rusted surfaces, especially those where the rust cannot be completely removed either manually or by an abrasive process.
Application
Rusted parts in general: gates, railings, metal structures, equipment, machinery, piping, bodywork, restorations and agricultural equipment, etc.
How to use
Surface preparation: remove oily material, paint, dust, etc. Remove only loose or surface rust, using sandpaper, steel wool or a wire brush, according to the degree of rust.
Use: used neat with a brush; avoid spray guns and misters. Apply a thin coat to make drying easier. Neutrox dries in about 8 hours at ambient temperature (20/25ºC). In cold, damp environments drying may be slower and whitish marks may appear, which do not affect the product's performance.
For good efficiency, it is recommended that, once dry, the treated surface be lightly sanded or brushed to remove any residual excess of the chemical treatment. Wipe off loose soot with a cloth. The surface will have a black/greyish appearance, ready to receive paint such as synthetic enamel, PU paint, catalysed epoxy, etc. For exceptional protection, apply GALVANOX (cold galvanising).
Heavy rust: in this case a single application may not be enough and rust residue may persist. Remove the rust again with sandpaper or steel wool, wipe off loose soot with a cloth, then apply NEUTROX.
Coverage: 10 m2/litre, which may vary depending on the depth of the rust, the application method, temperature, etc.
Packaging
500 ml, 1 litre, 5 litres, 20 litres and 50 litres.
Technical Specifications
| Attribute | Value |
|---|---|
| Appearance | Clear light green liquid |
| PH (5% H2O) | 1,4 |
| Density | 1,070 g/cm³ |
Precautions
Corrosive and flammable product. Use gloves, apron and safety goggles. Handle only in ventilated areas; do not apply to hot surfaces. In case of contact with skin or eyes, wash with plenty of water. In case of ingestion, do not induce vomiting. In case of eye contact or ingestion, seek medical attention. Keep out of the reach of children and animals. Do not incinerate or reuse the packaging.
Shelf life
Stored in a cool, dry place - 24 months
Need technical guidance?
Our team of specialists can recommend the ideal formulation for your industrial process. Talk to us and get personalized support.
