Skip to content
Biolub
LUBCOOL MS 80
Semi-Synthetic Soluble Oils

LUBCOOL MS 80

Conventional soluble cutting oil with high lubricity and protection. It must be added directly to the water, avoiding the formation of an inverted emulsion.

Application

Suitable for all types of machining of ferrous and non-ferrous metals in low- and medium-severity machining, such as: drilling, turning, milling, threading and other operations.

How to use

Drain, clean and sanitize the system reservoir tank with PRESERV X 49 (see Technical Data Sheet). Then dilute LUBCOOL MS 80.

Recommended concentration

Machining: 5 to 15 % (depends on the severity of the operation)

Advantages

Product free of nitrite, boron, secondary amine, chlorinated compound, phenolic derivative and heavy metals, reducing environmental impact (after the emulsion breaks) and risks to the operator's health, and therefore considered an environmentally sound product;

Contains 80% mineral oil;

Low tendency to foam;

Excellent protection and lubricity;

Packaging

5 litres, 20 litres, 50 litres and 200 litres.

Technical Specifications

AttributeValue
Appearance - visualDark brown
Appearance (solution 5%)-visualMilky
Cast iron corrosion, GG25, sol. 5%- DIN 51360/2No corrosion
Density 20/4 C- NBR 71480,900
PH (solution 5%)-MT 69,40
Refraction factor - MT 291,00

Precautions

Use PPE. Do not swallow. Avoid prolonged contact with the skin. In case of eye contact, rinse with plenty of water for at least 15 minutes. Keep out of the reach of children and animals. For further safety information, request the product's SDS.

Shelf life

Stored in a cool, dry place - 12 months.

Need technical guidance?

Our team of specialists can recommend the ideal formulation for your industrial process. Talk to us and get personalized support.